5 - REPAIR PROCEDURES
CAUTION: It is not recommended that untrained individuals perform any repair
work.
The following operations are detailed for qualified personnel only.
5.01 - Gearbox
To remove the gearbox:
1. Remove the belt
12
.
2. Remove the nut holding the pulley to the gearbox pinion shaft.
3. Remove the pulley.
4. Remove the nuts holding the gearbox to the central plate.
5. Remove the gearbox.
If it is necessary to replace any part on the inside of the gearbox, it is important to
replace oil seals or gaskets to ensure a tight fit when reassembling.
To replace the gearbox, follow the above instructions in reverse order.
5.02 - Blade Spindle
To remove a blade spindle:
1. Remove the belt
13
.
2. Remove the nut holding the pulley to the spindle shaft
(see fig. 11)
.
3. Remove the blades
14
.
4. Unbolt the bolts holding the rotor support to the mower deck.
5. If necessary remove and replace the bearings from the rotor using presses or
extractors.
6. Reassemble in reverse order
ensuring that the nut securing the top pulley (see
fig. 11) is tightened to 118 lb. Ft.
5.03 - Suggested Spare Parts
It is suggested that the following spare parts be kept on hand for the mower at all times
to prevent a minor problem from delaying work.
R
EPAIR
P
ROCEDURES
32
ABI A
TTACHMENTS
F
INISH
M
OWER
O
PERATOR
’
S
M
ANUAL
14
See Section 4.03 - Blade Maintenance.
13
See Section 4.05 - Belt Replacement.
12
See Section 4.05 - Belt Replacement.
Summary of Contents for ACYCMO72
Page 35: ...WARRANTY ...
Page 38: ...FINISH MOWER FRAME OPERATOR S MANUAL PARTS MANUAL 2 ABI ATTACHMENTS 06 2015 ...
Page 42: ...FINISH MOWER TRANSMISSION SPINDLE OPERATOR S MANUAL PARTS MANUAL 6 ABI ATTACHMENTS 06 2015 ...
Page 50: ...FINISH MOWER DECALS OPERATOR S MANUAL PARTS MANUAL 14 ABI ATTACHMENTS 06 2015 ...