INSTALLATION GUIDE
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material
Regularly clean with
mild liquid detergent
or soap and water
Note:
This product must be installed by a licensed tradesperson.
This product’s install must comply with AS1428.1 for installation within
Australia.
This is a general installation guide - there are many factors
that are
involved that can alter the installation method.
ABI takes no
responsibility if your product is not fixed to adequate wall structure
.
1
Install toilet pan (please refer to purchased toilet pan
install guide for more instructions). For back to wall
option,
DO NOT install cistern prior to backrest
.
2
Mark out fixing location as shown below. Ensure adequate
wall structure is located at fixing points.
Structure
Structure
217.5
217.5
85
4
Fix brackets to adequate structure. Ensure orientation of
brackets is as illustrated below.
Drill
Screw
Washer
Fixing Bracket
Pilot Hole
3
1. Using the large allen key provided, assemble the backrest
ensuring all fixings are tight.
2. Align backrest with the fixing locations and double check
marked location and drill a pilot hole.
1.
2.
5
Install cistern according to relevant install guide.
6
Fix backrest to bracket using the allen’s key provided to tighten
grub screws.
