DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
DOOR CUTTING GUIDE
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with the standards in your
respective countr y and must be adhered to by your licensed tradesperson.
DAVIS INTERNAL DOOR HANDLE
DOOR CUTTING GUIDE
Variant A
Variant B
S E T B AC K 6 0 M M
drill
18mm hole
chisel out
hole
check in
68mm high
x 27mm wide
Please
do not
cut door until you receive stock.
Use strike plate dimensions to select door cutting guide.
Variant A - 68mm high x 27mm wide
Variant B - 57mm high x 25mm wide
drill
7 mm hole
18MM
18MM
DOOR EDGE
DOOR EDGE
DOOR EDGE
DOOR
CENTRELINE
chisel out 83mm
deep hole
31mm high
x 17mm wide
S E T B AC K 6 0 o r 70 M M
drill
18mm hole
check in
57mm high
x 25mm wide
drill
7 mm hole
20MM
20MM
DOOR EDGE
DOOR EDGE
DOOR EDGE
DOOR
CENTRELINE
drill a 23mm hole
92mm deep
