DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE - DUMMY HANDLE
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with the standards in your
respective countr y and must be adhered to by your licensed tradesperson.
1
2
Dummy door install
Fix screws through handles into door panel.
Mount cover plate to handles.
Mark out desired location of dummy handle.
Note:
It is recommended to use 4 screws for additional security.
Additional screws are not included with handle.
Note:
If screwing into a hollow core door, screw into solid section to ensure secure installation.
1
1. Drill prescribed holes into door as per door cutting guide.
2. Install the latch into prescribed hole.
2
Insert latch bolt into hole.
3
Use connection screws to install spring mechanism.
1.
2.
4
On both sides of door, fix remaining screws through handles
into door panel. Mount cover plate to handles.
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors that are
involved that can alter the installation method.
INSTALLATION GUIDE
IN THE BO
X
1x Latch
1x Strike plate insert
2x Cover Plates
2x Handles
2x Screw caps
8x Screws
2x Connection screws
1x Latch bolt
1x Strike plate cover
