The installation method is as per the following pictures:
(1) Firstly, fix two wheels to each stand foot.
(2) Fix Rectangular frame into both stand uprights with 4
inner hexagonal screws
of size M8.
(3) Fix the Alignment jigs onto the
outer edge
of the stand and ensure
sawtooth
faces down
. Locate the sawtooth first on the Alignment jigs to the Alignment
screws to make the height of the Alignment jigs is the lowest. That will be
convenient for later installation.
(4) Screw down the two inner hexagonal screws (size M6) into the rear of the
Whiteboard. (Do not screw down to tight, remain the distance 3mm)
(5) Lock the screw that on the rear of the Whiteboard with locking hole that on
the top of the alignment jigs. Then screw down the screw.
(6) Use two hexagonal screws (size M6) to fix the underside of the Whiteboard
rear.
(7) Use the adjusting screw to confirm the height of the Whiteboard. Complete
installation.
- 9 -