DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with the standards in your
respective countr y and must be adhered to by your licensed tradesperson.
Mark out desired position for magnetic plate.
Drill holes in desired position and insert wall plugs
Fix backing plate using fixings provided.
Fix magnetic strip to backing plate.
Be aware of fingers jamming between
backing plate and magnetic strip, carefully
hold edges of magnetic strip.
Caution should be taken prior to the two
surfaces making contact
ABI takes no responsibility for injury caused
from incorrect installation.
beware of finger jam
Note: This product must be installed by a licensed trade
This is a general installation guide - there are many factors that are
involved that can alter the installation method.
INSTALLATION GUIDE
1
2
3
