SET BACK GUIDE
Note: This product must be installed by a licensed plumber.
The set back of the wall breach and distance of the nogging to tile or finished wall sur face
will dictate the necessar y extension par ts that will be required install.
Tile/Finished Wall Surface
Minimum distance between nogging and finished wall surface is 45mm
(or 3mm from in-wall breech to finished wall surface). To achieve this
connection the standard spindle and 20mm screw is required.
standard spindle
20mm screw
Nogging
Breech
Tile/Finished Wall Surface
Nogging
Breech
To maintain optimum spacing between handle and back plate a 10mm spacer
and 25mm screw are recommended for a distance of 45mm to 55mm from
nogging to finished wall surface, (or 13mm from breech to finished wall surface).
60
18
Tile/Finished Wall Surface
Nogging
Breech
standard spindle
25mm screw
10mm spacer
55
13
70
28
Tile/Finished Wall Surface
Nogging
Breech
standard spindle
25mm screw
10mm spacer
bonnet extender
For installations when distance between nogging and finished wall surface is
between 55mm and 65mm an additional spindle bonnet extender is required
(purchase separately). The bonnet extender can be cut to size to sit flush on the
spindle locking nut.
For distances 65mm up to 70mm between nogging and finished wall surface,
an extended spindle (available for additional purchase) is required.
Note: To achieve distances greater than 70mm additional parts can be used
with the extended spindle. (bonnet extender, 10mm brass spacer)
extended spindle
25mm screw
45
3
10mm spacer
Bonnet Extender
10mm Spacer
ASSEMBLY SETUP GUIDE
Note: This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors that are involved that can alter
the installation method. This product install must comply with AS/NZS 3500.
Example Two:
Centred basin mixer/bath spout setup
200mm centre to centre
Kingsley Assembly Tap Handles
Kingsley Spout
In-line plumbing breech
available for purchase from ABI
Example Three:
Shower Setup
Kingsley Assembly Tap Handles
200mm
centre to centre
In-line plumbing breech
available for purchase from ABI
Feed out to shower
supplied by plumber
Example One:
Off set basin mixer/bath spout setup
200mm centre to centre
Kingsley Assembly Tap Handles
Kingsley Spout
In-line plumbing breech
available for purchase from ABI
Flexible poly pipe
supplied by plumber
1
2
3
4
5
6
7
8
WHATS IN THE BOX
1. Back plate x 2
2. 10mm Brass Spacer x 2
3. Handle Body x 2
4. Washer x 2
5. 20mm screw x 2
6. ‘Hot’ Handle Cap x 1
7. ‘Cold’ Handle Cap x 1
8. 25mm screw x 2
