DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with the standards in your
respective countr y and must be adhered to by your licensed tradesperson.
Note: This product must be installed by a licensed trade
This is a general installation guide - there are many factors that are
involved that can alter the installation method.
INSTALLATION GUIDE - FLOOR MOUNTING
1
Mark out desired position for door stop in relation to
door catch on door. Drill pilot holes into floor.
2
Fix stop to floor using fixings provided.
3
Mount backplate to door stop.
4
Mark out desired position for door catch in relation to
door stop magnet on floor. Drill pilot holes into door.
5
Fix catch to door using fixings provided.
6
Mount backplate to door catch.
