EN
-
20
13 Appendix
ABICOOLER 1300
12.2 Disposing of consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the
consumables’ manufacturer.
► Please observe the relevant local regulations and disposal instructions in the safety data sheets
specified by the manufacturer of the consumables.
The disposal of dust collecting bags and disposal bags is subject to special waste regulations. The dust must
not enter sewage systems or be disposed of together with normal household waste.
► Observe the local and official regulations.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
13 Appendix
13.1 Connecting diagram for flow control
Fig. 6
Connecting diagram for flow control
Connection for flow control
on the front of the device
Torch trigger
Flow control
(low cooling liquid volume opens the circuit)
Welding power source
Connection housing
Torch control switch on the
welding power source
