ABICOOLER 1300
1 Identification
EN
-
3
1 Identification
The ABICOOLER 1300 cooling unit is used by industry and the trade sector exclusively for the cooling of
liquid-cooled welding torches. These operating instructions only describe the ABICOOLER 1300 cooling
unit. When used in these operating instructions, the terms “device”, “product”, and “cooling unit” always
refer to the ABICOOLER 1300 cooling unit. The device may be used only with original ABICOR BINZEL
spare parts. The device is available in 230 V and 115 V versions.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.
1.2 Nameplate
The device is labeled by means of a nameplate on the housing.
► You will need the device type, device number and serial number as indicated on the nameplate for
inquiries.
1.3 Signs and symbols used
The following signs and symbols are used in the operating instructions:
1.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and shown prior to
potentially dangerous work steps. The following signal words are used depending on the type of hazard:
Fig. 1
Nameplate
General instructions.
Action(s) to be carried out in succession.
Lists.
Cross-reference symbol refers to detailed, supplementary or further information.
Caption, item description.
1
A
DANGER
W
Describes an imminent threatening danger. If not avoided, it may cause severe injuries or death.
WARNING
W
Describes a potentially dangerous situation. If not avoided, this may result in death or serious injuries.
