2000 advanced/2000 10 Troubleshooting
9.2 Filter element cleaning
The service life of the filter is approximately 500 working hours. Its filterable particle size is 70
μ
m. Clear sediment
must be removed from the filter element. Please follow the steps below to clean the filter element:
Figure 11
Clean the filter element
1 Unscrew the filter bowl (4).
2 Remove the filter element (3) and O-ring (2).
3 Place the filter element (3) under clear running water for cleaning.
4 Install the filter element (3) and O-ring (2) into the filter bowl (4).
5 Tighten and fix the filter bowl (4) onto the filter.
10 Troubleshooting
DANGER
Risk of injury and machine damage when handled by unauthorized persons
Incorrect repair work and modifications to the product may lead to major injuries and machine damage. The product
warranty will be rendered invalid if the unit is handled by unauthorized persons.
• The equipment or system may only be operated by the personnel with corresponding capabilities.
Please observe the attached document “Warranty”. Please consult your retailer or the manufacturer in case of any
doubts and/or problems.
NOTICE
• Please also consult the operating instructions for the welding components and welding torch.
EN - 17
1 Filter 2 O-ring 3 Filter element 4 Filter bowl
