EN - 8
4 Scope of delivery
MIG/MAG ROBO welding torch
4 Scope of delivery
The welding torches in this series come as entire units ready for welding, i.e. with the cable
assembly and central connector. Check whether you have selected the correct equipment parts
for initial assembly.
The ROBO cable assembly does not make the ROBO welding torch fully functional. Additional
welding-task-dependent components are also required for the initial assembly. These include the
following:
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be found in the current
catalogue. Contact details for advice and orders can be found online at
www.binzel-abicor.com
.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to exclude
the risk of transport damage.
4.2 Storage
Physical storage conditions in a closed environment:
Tab. 2 Ambient conditions for shipment and storage on page EN-5
• Torch
• Cable assembly
• Cable support on machine side with central
connector
• Operating instructions
Tab. 8
Scope of delivery
• Bracket (for attachment to the robot)
Tab. 9
Options
Goods inspection
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Packaging for return
Where possible, use the original packaging and the original packaging
material. If you have any questions about the packaging and/or how to
secure an item during shipment, please consult your supplier.
Tab. 10
Transport
