24
General information about Control Medi
To be able to use your Control Medi there are certain things that you should know:
WARNING:
Make sure that the user always can get help through a backup system if the product
does not operate correctly.
WARNING:
Before you use the product, make sure that all connected appliances and electronic
equipment are correctly installed, used as intended and safe to use.
Control Medi is delivered preset with GewaLink channels, meaning that it is possible to use the
transmitter immediately after the batteries has been inserted. See section
Inserting Batteries
.
To enter the programming mode, press first Button
4
and then
simultaneously
one of the
Function
buttons for 2 seconds. Different
Function
buttons are chosen depending on what is to be
programmed.
If you press the wrong button or makes a mistake when programming you can always press Button
4
for two seconds. It works as a
Reset
button.
It is important not to wait too long between the different steps when programming. After a certain
time your Control Medi automatically leaves the programming mode to save power.
If a button on your Control Medi or control switch is pressed for more than 1 minute, Control Medi
will stop transmitting to save power.
The settings can be protected by using the Settings Lock.
This picture shows the various terms and functions which are described in the text.
Symbols
The following symbols appear in the text
throughout this manual:
X
and
Y
Any button on Control Medi
Y
Any button on another transmitter to be programmed
1
…
4
Button 1-4
4
2 sec
Button 4 held pressed for approximately 2 seconds
4
+
1
2 sec
Button 4 and 1 held pressed for approximately 2 seconds
Indication lights
Function
buttons
1
-
4
Fig 1
Summary of Contents for 429240-1
Page 1: ...Control Medi Easy User manual Art Nr 429240 1 SE EN NO 5 0 ...
Page 5: ...5 ...
Page 22: ...22 ...
