24
Resetting to Factory Setting
It is possible to reset all of BigJack's buttons and settings to the factory
defaults, shown below:
Beep Volume reset to value 3.
Acceptance dalay reset to value 1, no delay.
GewaLink channels 16-21 programmed to the
Function
buttons 1-6.
Proceed as follows to reset to factory defaults:
1. Press
P
and
3
at the same time.
2. Press in turn the buttons
5
,
1
,
2
,
3
,
6
.
3. The indication lamps for button 1 flashes green to show that the operation
is complete.
Resetting to default setting
Press
P
+
3
,
5
,
1
,
2
,
3
,
6
.
External Control Switches
It is possible to connect external control switches to BigJack, which influence
buttons 1-6. The control contacts are connected to the inputs on the front
using 3.5 mm telephone plugs.
Cleaning
BigJack may be cleaned with a rag that has been immersed in water with a
small amount of washing up liquid and then
wrung dry extremely
thoroughly
. BigJack may be dried with a dry rag after cleaning.
Summary of Contents for Gewa BigJack Series
Page 16: ...16...
Page 28: ...28...
Page 40: ...40...
Page 52: ...52 402500_Manual Gewa BigJack_SE GB NO DE_RevE Feb 2017...