6
Use Mini arm
Lock Mini arm to the clamp
1. Put the set screw into the hole on the side of the clamp.
2. Tighten the set screw with the hex key.
Change the position of Mini arm
1. Hold the equipment that is mounted on Mini arm.
2. Loosen the joint of the arm.
3. Change the position of the arm.
4. Tighten the joint of the arm.
Technical data
Max. arm length
370 mm
Thread
6 mm
Max. gap for tabletop
40 mm
Min./max. pipe for clamp
15–40 mm
Max. load
400 gram
Maintenance
Clean Mini arm with a moist cloth and weak detergent. Mini arm can also be cleaned with a moist
cloth and aluminium acetotartrate, chlorhexidine or ethyl alcohol. Dry Mini arm with a dry cloth.
