12
STEP 5
Make the assembly stand up. Tighten the
Left and Right Upper Arms (2/3)
using: 2 PCs of
M8x12mm Socket Head Cap Screw (86)
and
M8 Flat Washer (71)
. Then tighten all bolts.
NOTE: Fully tighten bolts at end of this step.
STEP 6
Remove the clicker from the
Drive Cord (52)
.
#86 M8X12mm 2PCS
#71 M8 2PCS
#89 Allen Wrench 6mm
