Usage:
1. After washing hands, place hands under air outlet around 10 cm
away. The hand dryer will be automatically activated using the
automatic sensor. Please retreat the hands when hands are dried, and
it will stop working in 2 seconds.
1. Drill 4 holes in the wall.
2. Screw the two fixing screws off the cover with the hexagonal
wrench and remove the panel. Detach sensor connecting wire.
Installation Method:
Test Operation:
After installation, please test the hand dryer operation according to
the steps below:
1. The hand dryer should be in standby mode after the power has
been switched on.
2. When hands are placed 10cm below the nozzle, the airflow
should automatically start blowing.
3. In 2 seconds after the hands have been moved away from the
nozzle, the hand dryer should stop automatically.
4. The hand dryer should automatically stop after 60 seconds of
work.
4. Put the cover on the machine and cover it using the hexagon
wrench.
3. Using the screws, fix the machine on the wall & connect it to
electric power. (Please Note: We recommend the installation to be
done by a professional electrician only).
