17
Washer
1
49
Plug
2
18
Nut
1
50
Foam handle
2
19
Roll
1
51
Pulse sensor screw
2
20
Right pedal
1
52
Screw
1
21
Left pedal
1
53
Measuring pulse wire
2
22
Bushing
2
54
Resistance wire
1
23
Bal bearing
2
55
Washer
1
24
Screw M8x15
6
56
Washer
1
25
Column of the saddle
1
57
Screw
1
26
The bottom sensor cable
1
58
Washer
1
27
Seat
1
59
Central portion cable
1
28
Cap (front)
2
60
Crank cover
2
29
Cap (back)
2
61
Voltage regulator
1
30
Axis
1
62
31
Bearing
2
68
32
Hoop
1
69
ASSEMBLY INSTRUCTIONS
STEP 1. Stabilizers installation
• Connect the Rear Stabilizer (4) and caps (29) with a socket welded to the main frame (1) and tighten it by using two washers (36),
two screws (35) and two nuts (34).
• Connect the front stabilizer (6) and caps (28) with a welded to the main frame (1) socket and tighten using two washers (36), two
screws (35) and two nuts (34).
• Attach the two pedals (R & L) to the housing (case). The pedal marked "R" (20) to attach the right side, and the pedal marked "L"
(21) on the left.
NOTE: The right pedal "R" to be tightened in accordance with the clockwise and the left pedal "L" counter-clockwise.
• For both pedals attach straps and adjust them to fit your foot using four placed in these holes.
