AbiSee Eye-Pal SOLO LV, User Manual

10 

Book Mode 

How to Use Book Mode with Eye-Pal SOLO LV - Book Mode allows you 
to save documents to a USB flash drive. 

How to start scanning in Book Mode:  

1.

Turn on the Eye-Pal SOLO LV. 

2.

Wait for the music to stop playing, and then plug the USB flash drive 
into the USB Port. You will hear “External memory device is detected. 
Entering Scanning Mode.” 

3.

Place the book on the platform. 

4.

Wait for the camera shutter sound. 

5.

Scan the page.  

6.

Remove the book, turn the page and scan. 

7.

It is faster to scan all the even pages first and then the odd pages. 

How to convert a saved Book to text and MP3 ( audio file ): 

1.

When you’re done scanning, press the Pause/Resume button and listen 
as your pages are being converted into a text file and audio file. 

2.

When the process is complete, you will hear “Conversion complete, 
you can now disconnect external memory device.” 

3.

Take out the flash drive when instructed.  

Now, you can use the flash drive on your computer to view, read, and 
listen to your saved text. 

Headphones Instructions 

(Or External Speakers) 

1. Use headphones with a pin audio jack. Headphones with a USB 

connector are not compatible with the Eye-Pal SOLO LV. 

2. With the device on, plug the headphones or speakers into the Eye-Pal 

SOLO LV. The headphone jack is located on the right side of the 
device. 

Note: Always stop reading before plugging or unplugging the 
headphones or external speakers. If you add or remove the 
headphones or speakers while the Eye-Pal SOLO LV is reading and a 
problem occurs, restart the device and follow the instructions.