11
Tips for Best Performance
•
Give your Eye-Pal SOLO LV time to work. Too many commands at once or
too quickly will overwhelm the device. For optimal performance, Eye-Pal
SOLO LV should process only one command at a time.
•
When Eye-Pal SOLO LV is starting up, make sure that there is no
document on the base and that the ABiSee logo is not covered.
•
When placing a document onto Eye-Pal SOLO LV, keep the text flat and
make sure there are no obstructions blocking the camera’s view of the text
(including your hands).
•
Make sure that a document is moved completely off the Eye-Pal SOLO LV
before placing another document onto it.
Troubleshooting
The Eye-Pal SOLO LV is trouble free most of the time due to its simple, yet
effective design. However, in the off chance that something does go wrong,
here are some tips:
•
If Eye-Pal SOLO LV freezes up, stops responding to your commands or is
acting abnormally, try holding the red triangle button on the front panel for
several seconds. You should hear “Restarting”. This process does not restart
the device itself, just the software.
•
If this doesn’t solve the problem, turn off the device, and then turn it back
on by pressing the green round button on the front panel.
•
If problems keep occurring, please call your local distributor or ABiSee,
Inc. customer service professionals.
Important Notes
•
The Eye-Pal SOLO LV is programmed to correct itself and will restart on
its own, if necessary. If this occurs, wait a moment before using it again.
•
DO NOT REMOVE the ABiSee logo from the center of the top panel of
the Base. This logo allows the camera to recognize when a document is
placed onto the device. Without the logo, the device will malfunction.
Summary of Contents for Eye-Pal SOLO LV
Page 1: ...e Pal SOLO LV U Eye Pal SOLO LV User Manual Manual ...
Page 13: ...13 NOTES ...
Page 14: ...14 NOTES ...
Page 15: ...15 NOTES ...
