AbiSee Eye-Pal SOLO LV, User Manual

6 

Front Panel Buttons 

Power - the green round button, on the right side of the front panel, is 
used to turn the Eye-Pal SOLO LV on and off.  

Pause/Resume Reading - the yellow round button, to the left of the black 
volume knob on the front panel, allows pausing and resuming reading. If 
this button is held down for 3 seconds, it will enable/disable the use of the 
motion activated controls. 

You can control how Eye-Pal SOLO LV reads: 

Read Previous Sentence - the red triangle button on the left side of the 
front panel is used to return to the previous sentence. This button may be 
pressed as many times as needed to return to a specific sentence.  

Reading Speed – there are two white triangle buttons, one above the 
other, located to the right of the volume knob on the front panel. The top 
button will increase the reading speed while the bottom button will decrease 
the reading speed. 

Volume – the black round knob in the middle of the front panel is used to 
adjust the volume. To increase the volume, turn this knob clockwise. 

Restarting – to restart the Eye-Pal SOLO LV for any reason, press the red 
triangle button for 5 seconds. You will hear “Restarting.” 

Using Hand Gestures 

To use hand gestures, press and hold the yellow circular button on the front 
panel for 3 seconds. Please note that the following hand motions only work 
when a document is on the platform. 

Pause/Resume Reading - move your hand slowly above the printed 
material from left to right.