AbiSee Eye-Pal SOLO LV, User Manual

9 

Advanced Features for Reading 

Magnified text may be displayed in multiple ways: 

Wrapped Text – This is the default setting in Reading Mode. 

Full Screen Scrolling - (without audio or highlighted line)-  
If you would like to read magnified text on the screen without audio; while 
in Reading Mode, hold down the Recall button and the Pause/Resume 
button on the keypad, and then press the Increase Reading Speed button, 
on the front panel. Use Up and Down keys to navigate through the text. To 
return to speech output, repeat these steps.  

Continuous Line Display - To read the text in a single, running line; hold 
down the Recall button and the Pause/Resume button on the keypad, and 
then press the Decrease Reading Speed button on the front panel. Line 
speed is controlled with the Left and Right Arrow keys. To return to normal 
speech output, repeat these steps 

Zoom and Color buttons can be used in all three ways. 

You can also read through columns and listen to the page layout 

described to you. 

Reading Columns - when the Left Arrow and Right Arrow buttons are 
pressed at the same time, Eye-Pal SOLO LV will read through columns. 
Press them again to read down columns. 

Describing Page Layout - when the Up Arrow and Down Arrow buttons on 
the keypad are pressed at the same time, Eye-Pal SOLO LV will describe the 
layout of the page. 

You can read in many languages  

Changing Languages - when the Recall and Save buttons on the keypad 
are pressed at the same time, Eye-Pal SOLO LV will switch languages 
and/or voices. Spanish text can be read if the Spanish voice is selected.  

The light can be turned off easily 

Turning the Light off – when the Up Arrow, Down Arrow and Pause 
buttons on the keypad are pressed at the same time, the light will turn off.