2-18
IP35V
2.7 PnP/PCI Configurations
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Resources Controlled By
Auto
Item Help
x IRQ Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
PCI Latency Timer(CLK)
32
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Resources Controlled By
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto]:
The system will automatically detect the settings.
[Manual]:
Choose the specific IRQ resources in the “IRQ Resources” menu.
- IRQ
Resources
Click <Enter> key to enter its submenu:
This item sets each system interrupt to either [PCI Device] or [Reserved].
PCI/VGA Palette Snoop
This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.
[Enabled]:
MPEG ISA/VESA VGA cards work with PCI/VGA.
[Disabled]:
MPEG ISA/VESA VGA cards do not work with PCI/VGA.
PCI Latency Timer(CLK)
This item controls how long each PCI device can hold the bus before another takes over. When
set to higher values, every PCI device can conduct transactions for a longer time and thus
improve the effective PCI bandwidth. For better PCI performance, you should set the item to
higher values.
