2-4 Chapter
2
5. Push down the Retention Lock at both sides of the Fan and Retention Mechanism
Assembly to lock up together with the Retention Module Base.
6. The Fan and Retention Mechanism Assembly and Retention Module Base should
now firmly lock up with each other with the heatsink inside.
ATTENTION:
Do not forget to set the correct bus frequency and multiple for your
processor.
2.4. System
Memory
This system board provides two 184-pin DDR DIMM slots for DDR 400/333/266
memory modules with memory expansion size up to 2GB.
2.4.1.
Memory Configuration Table
DIMM
DIMM Module
Total Memory
1
128MB, 256MB, 512MB, 1GB
128MB ~ 1GB
2
128MB, 256MB, 512MB, 1GB
128MB ~ 1GB
Total System Memory
128MB ~ 2GB
IS-10 / IS-11 / IS-12
