1-22
IX48 GT3
1.10 Connecting Rear Panel I/O Devices
The rear I/O part of this motherboard provides the following I/O ports:
•
Mouse:
Connects to PS/2 mouse.
•
Keyboard:
Connects to PS/2 keyboard.
•
EZ-CCMOS1:
This button enables clearing the CMOS
memory without uncovering the system chassis.
To clear the CMOS memory by EZ-CCMOS1:
Step 1:
Power off the system.
Step 2:
Push this button. Wait for a few seconds. The
default CMOS memory is now reloaded.
Step 3:
Restart the system.
•
OPT-IN1:
This connector provides an S/PDIF-In connection through optical fiber from
digital multimedia devices.
•
OPT-OUT1:
This connector provides an S/PDIF-Out connection through optical fiber to
digital multimedia devices.
•
eSATA1:
This connector supports the external SATA connection.
•
AUDIO1:
Cen./Sub. (Center / Subwoofer):
Connects to the center and subwoofer channel.
R.L./R.R. (Rear Left / Rear Right):
Connects to the rear left and rear right channel.
S.L./S.R. (Surround Left / Surround Right):
Connects to the surround left and
surround right channel.
Line-In:
Connects to the line out from external audio sources.
Line-Out:
Connects to the front left and front right channel.
Mic-In:
Connects to the plug from external microphone.
•
IEEE1394-1:
Connects to devices of IEEE1394 protocol.
•
LAN1:
Connects to Local Area Network.
•
USB1/USB2:
Connects to USB devices such as scanner, digital speakers, monitor, mouse,
keyboard, hub, digital camera, joystick etc.
