License Scanner – Installation Guide
Version 0.1
Page 8 of 9
Copyright © ABit Consulting 2011
Scanner: Image Capture Error [clrhw]
There are some motherboards which do not provide sufficient bandwidth for each connected
USB devices. The scanners are using the full USB 2.0 bandwidth for fast operation.
A small application which can help you to solve this issue is available.
http://www.downloads.abit-wa.com.au/products/dev/CLRSpeedConf.zip
It will slow down the transfer rate of the Card Reader so you will not experience image
capture errors.
Please follow the instructions below:
To reset the Half-Clock please:
1.
Rename the ex1 file to exe
2.
Tick IN the “HalfClock” checkbox
3.
Pull through the slider to the right side
4.
Click on “Store” button
After you have stored these settings please try to scan a document. If the device still fails
please try to unplug the other USB devices (mobile HDD, pen drive, etc.).
