NF-M2P/NF-M2S/NF-M2SV
17
2. BIOS Setup
This motherboard provides a programmable EEPROM so that you can
update the BIOS utility. The BIOS (Basic Input/Output System) is a
program that deals with the basic level of communication between
processor and peripherals. Use the BIOS Setup program only when
installing motherboard, reconfiguring system, or prompted to “Run
Setup”.
After powering up the system, the BIOS message appears on the
screen, the memory count begins, and then the following message
appears on the screen:
PRESS DEL TO ENTER SETUP
If this message disappears before you respond, restart the system by
pressing <Ctrl> + <Alt> + <Del> keys, or by pressing the Reset
button on computer chassis. Only when these two methods fail should
you restart the system by powering it off and then back on.
After pressing <Del> key, the main menu screen appears.
Phoenix – AwardBIOS CMOS Setup Utility
►
Standard CMOS Features
Load Fail-Safe Defaults
►
Advanced Features
Load Optimized Defaults
►
Advanced Chipset Features
Set Supervisor Password
►
Integrated Peripherals
Set User Password
►
Power Management Setup
Save & Exit Setup
►
PnP/PCI Configurations
Exit Without Saving
►
PC Health Status
Esc: Quit
F10: Save & Exit Setup
: Select Item
Time, Date, Hard Disk Type…
※
In order to increase system stability and performance, our
engineering staff is constantly improving the BIOS menu. The BIOS
setup screens and descriptions illustrated in this manual are for
your reference only, and may not completely match with what you
see on your screen.
※
Do not change the BIOS parameters unless you fully understand its
function.
