3-12
Chapter 3
OnChip IDE Channel0 / OnChip IDE Channel1:
This item allows you to enable or disable the primary (IDE1) and secondary (IDE2) IDE controller. Select
[Disabled] if you want to add a different hard drive controller.
IDE Prefetch Mode:
Two options are available: Disabled or Enabled. The default setting is
Enabled
. The onboard IDE drive
interfaces supports IDE prefetching for faster drive accesses. If you install a primary and/or secondary
add-in IDE interface, set this field to
Disabled
if the interface does not support prefetching.
IDE DMA transfer access:
This item selects the DMA mode for devices connected through IDE channels.
OnChip SATA Controller:
This item enables or disables the on-chip SATA controller.
SATA DMA transfer:
This item selects the DMA mode for devices connected through SATA channels.
#
RAID Config:
Click <Enter> key to enter its submenu:
IDE RAID:
This item allows you to enable or disable the IDE RAID function.
!
IDE Channel 0/1 Master/Slave RAID, SATA Primary/Secondary Master RAID:
Select the disks that you want to use as RAID disks.
#
Back to Integrated Peripherals Setup Menu:
OnChip USB:
This option enables or disables the USB controller. If you choose to disable this item, the “
USB 2.0
Controller
” “
USB Keyboard Support Via”
“
USB Mouse Support Via
” and “
USB Mass Storage
Support”
items will not be able to select in
Integrated Peripherals
menu.
NF8 Series
Summary of Contents for NF8 Series
