M o d i f y
To change the setting of a highlighted selection you
can press either the Page Up (PU) and Page Down
(PD) keys or the Plus (+) and Minus (–) keys. Press-
ing a key once will switch to the next setting op-
tion for the selected item.
Toggle Calendar
Pressing the F3 key toggles between the system
memory list shown on the screen illustration and a
calendar for the month set by the Date setting.
If your mainboard is already installed in a working sys-
tem the proper entries are already entered on this screen
and you shouldn’ t change them except for adjusting the
Date and Time entries if necessary.
Date & Time
The first two lines on the screen are the date and time
settings for the system clock.
Hard Disk Type & Parameters
Use the IDE HDD Auto Detection feature to automati-
cally enter the drive parameters of IDE hard disk drives
in these fields. If you have only SCSI hard disk drives
installed in your system leave the settings here at None.
Only hard disk information needs to be entered here.
Other IDE devices do not use this.
For an IDE hard drive, you should set the entry to “ Auto”
and the BIOS will automatically detect all drive informa-
tion needed. You can use the IDE HDD Auto Detection
utility described later to supervise the auto-detection pro-
cess. If you want to do this, leave the drive set to “ None” .
You can also enter specifications manually by using the
“ User” option.
Summary of Contents for PR5
Page 10: ...System Block Diagram ...