Introduction of SA7 Features
User’s Manual
2-3
!
One internal PC speaker header
!
One Intel
®
specification front panel header
!
One Intel
®
specification audio header
!
Hardware monitoring
：
Included fan speed, voltages, processor and system environment temperature
!
Board size: 305 * 244mm
#
The Switching Power Supply must meet ATX 2.03 specification with ATX12V1 Power
connector.
#
Supports Wake On LAN, Wake On Ring, but your ATX power supply 5V standby power must
be able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
#
This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are
used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds
is not guaranteed due to the specific component specifications.
#
Specifications and information contained in this manual are subject to change without notice.
Note
All brand names and trademarks are the property of their respective owners.
2-3. Item
Checklist
Check that your package is complete. If you discover any damaged or missing items, please contact your
retailer or dealer.
$
One
ABIT SA7 Motherboard
$
One 80-wire/40-pin ribbon cable for master and slave Ultra DMA 133, Ultra DMA 100, Ultra DMA
66 or Ultra DMA 33 IDE devices
$
One ribbon cable for 3.5” floppy disk devices
$
One compact disc for support drivers and utilities
$
One back panel I/O shield
$
One user’s manual for the motherboard
