BIOS Setup
3-3
IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave:
Click <Enter> key to enter its submenu:
IDE HDD Auto-Detection:
This item allows you to detect the parameters of IDE drives by pressing <Enter> key.
The parameters will be shown on the screen automatically.
IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave:
When set to [Auto], the BIOS will automatically check what kind of IDE drive you
are using. If you want
to define your own drive by yourself, set it to [Manual] and
make sure you fully understand the meaning of the parameters. Please refer to the
instruction manual provided by the device’s manufacturer to get the setting right.
Access Mode:
This item selects the mode to access your IDE devices. Leave this item to its default
[Auto] setting to detect the access mode of your HDD automatically.
Capacity:
This item displays the approximate capacity of the disk drive. Usually the size is
slightly greater than the size of a formatted disk given by a disk-checking program.
Cylinder:
This item configures the numbers of cylinders.
User’s Manual
