|
Additional technical information
4
Additional technical information
Additional technical information is required to install the WHEMH10, 1W0001 and PVEMH10 mounting plates on a
wall or on the POLEMH1 mounting pole and to install an eMH1 Wallbox on the mounting plate. It is contained in sep-
arate documents.
In addition, the technical data for your mounting plate and the compatible products are collated in product-specific
data sheets. You can download these documents from the ABL website using the following link:
https://www.ablmobility.de/en/service/downloads.php
NOTE
Displaying the additional information on a computer, tablet or smartphone
Additional technical information is made available in the Portable Document Format (PDF).
To display PDF files, you need the free Adobe Acrobat Reader or comparable software.
You can find further information about our product range, as well as about separately available accessory compo-
. Please visit:
Intended use
The WHEMH10, 1W0001 and PVEMH10 mounting plates are holders for various eMH1 wallboxes from ABL. They can
be fixed either to the wall or to the POLEMH1 mounting pole from ABL. While the WHEMH10 mounting plate only
serves as a cable holder, the 1W0001 offers an integrated key switch for controlled enabling of the charging pro-
cess. The PVEMH10 mounting plate can be used in conjunction with a PV system for charging via photovoltaics or via
mains power.
Information in this document
This document describes how to install the WHEMH10, 1W0001 and PVEMH10 mounting plates, as well as the addi-
tional switching functions of the 1W0001 and PVEMH10 models. It is recommended that all working steps described
in this document are carried out by qualified specialist electrical contractors only.
User
Specialist electrical contractor
Installation manual (this document)
Additional technical information
Data sheets
eMH1 installation instructions
POLEMH1/2/3 installation instructions
