Introduction to the WHEMH10, 1W0001 and PVEMH10 mounting plates
|
9
Introduction to the WHEMH10, 1W0001 and PVEMH10 mounting plates
Thank you very much for choosing the WHEMH10, 1W0001 or PVEMH10 mounting plate from ABL!
The mounting plates are used for attaching an ABL eMH1 Wallbox to a wall or the optionally available POLEMH1
mounting pole. All mounting plates have a holder on the front for winding up your wallbox’s charging cable to mini-
mise the risk of tripping at the point of use. The 1W0001 mounting plate also has an integrated key switch which can
be used to block the wallbox’s charging function and only enable it for authorised access. The PVEMH10 mounting
plate has a selector switch which can be used in conjunction with the supplied coupling relay and the inverter of a PV
system to switch between charging via photovoltaics (ECO mode) or via mains power (GRID mode).
With housing impermeability in accordance with IP44, the mounting plates are suitable in principle for outdoor instal-
lation. Further information on technical data is available in the appendix from page 28.
Identification of the mounting plate
There is a rating plate on the back of each mounting plate for identification purposes. Check the rating plate to make
sure that the model you have is the mounting plate suitable for your intended use.
WHEMH10
Bracket eMH1
MADE IN GERMANY
ABL GmbH
Albert-Büttner-Straße 11
2022-01-27
Typ: ZUBEHÖR
D-91207 Lauf / Pegnitz
1W0001
IP44
Bracket eMH1
IP44
MADE IN GERMANY
ABL GmbH
Albert-Büttner-Straße 11
1W0001
2022-01-27
Typ: ZUBEHÖR
D-91207 Lauf / Pegnitz
PVEMH10
IP44
Bracket eMH1
IP44
MADE IN GERMANY
ABL GmbH
Albert-Büttner-Straße 11
PVEMH10
2022-01-27
Typ: ZUBEHÖR
D-91207 Lauf / Pegnitz
Items supplied
All mounting plates are supplied with the following components:
Mounting plate, 1 pc
Drilling template, 1 pc
Download note (multilingual), 1 pc
Zubehör
Download-Hinweis, Stand 10/2019
Produktnummer: 0301431_b
Die ausführlichen Installations- und
Bedienungsanleitungen stehen als
Download unter
www.ablmobility.de
bereit.
The detailed installation and operating
manuals are available for download at
www.ablmobility.de
.
DE
EN
ABL_Downloadhinweis-Anleitung_01.indd 1
21.10.19 17:03
Flat-head screw (5×20 mm, T20),
3 pcs
Countersunk screw (5×60 mm, T20),
6 pcs
Countersunk screw (5×20 mm, T20),
6 pcs
Wall plugs (8×40 mm), 6 pcs
Blind plugs, 8 pcs
The 1W0001 mounting plate additionally contains:
Key for enabling the charging process,
2 pcs
031 XXX
