Installation –
Mechanical installation of the wallbox on the mounting plate |
23
13
Place the upper part of the housing onto the hous-
ing base.
14
Fix the upper part of the housing to the housing
base using the screws removed in
Step 2
in section
“Preparing the eMH1 Wallbox for installation” on
15
Switch on the RCCB in the wallbox and/or the do-
mestic power distribution.
16
Now lock the housing cover using the key.
This completes the installation of the eMH1 Wallbox on the mounting plate and you can now start up the wallbox.
You can find information on this in the section “Starting up the wallbox” in the eMH1 installation instructions
(