| Appendix
28
Appendix
Technical specifications
Model code
WHEMH10
1W0001
PVEMH10
Compatibility
(Wallbox eMH1)
All models
1W7201, 1W7208,
1W7221,1W7248, 1W1101,
1W1108, 1W1121, 1W2208
Compatibility
(inverter)
–
All inverters
with control output
Switching function
–
Key switch with
two positions
Selector switch
with two positions
Key position
–
horizontal: Charging blocked
vertical: Charging enabled
ECO: Charging via PV power
GRID: Charging via mains
power
Interface
–
Internal
Storage temperature
-30 to 85°C
Operating temperature
-30 to 50°C
Relative humidity
10 to 90%, no condensation
IP rating
IP44
Type
Wall bracket with integrated cable storage holder
Fixing type
Plug and screw fixing (fixings included)
Material
Plastic
Housing colour
black, similar to RAL9005
Dimensions (H × W × D)
482 × 226 × 93 mm
482 × 226 × 101 mm
Weight
approx. 0.9 kg
approx. 0.95 kg
approx. 1 kg
IP rating
IP rating
Explanation
IP44
Protection class of the unit (protection against penetration of solid foreign bodies
with a diameter greater than 1 mm and against splashing water from all sides)
NOTE
IP protection after correct installation of the eMH1 Wallbox
Please note that full IP44 protection is only achieved if the eMH1 Wallbox has been properly installed on the
mounting plate. To do this, read the installation instructions for the eMH1 Wallbox, too, and follow all the in-
structions and notes in this document:
