2
NAME OR THE PARTS
1. Control panel
2. Adjustable air vent
3. Top cover
4. Side panel
5. Front panel top
6. Front panel bottom
7. Filter
suction
grate
8. Panel
back
9. Condensate drainage hose
10. Condensate drainage plug
11. Back castors
12. Condensate drainage hose
13. Power cable
3
CONTROL PLATE DESCRIPTION
OPERATION INSTRUCTION
Starting the unit
1. Firstly, turn the humidity control switch to the “OFF” position.
2. Plug in the dehumidifier.
3. Turn on the humidity control switch ( to right side)and turn the same switch to the
reading of the desired humidity (60% in general as shown on position
“
7
”
).
Turning off the unit
1. Turn the humidity control switch to the left side to the “OFF” position and the power
supply is cut off and the unit stops in operation.
2. If the dehumidifier is not in use for a long time, please disconnect the power cord plug
from the outlet.
PRECAUTIONS
1. The dehumidifier shall not operate if the humidity setting is higher than the ambient
humidity.
2. Drain the water in the water storage tank when the water in the tank is full and the
water level indicator light illuminates. And then install the empty water tank back to its
position, so the unit can continue its operation.
3. When the unit stops, you have to wait for 3 minutes before you can restart the unit to
protect the compressor from damage.
4.The humidify and its related position number on the humidity control switch, and we
suggested that setting on 4~6 position will be
comfortable.
CONTROL SWITCH POSITION
NO.
APPROXIMATE
HUMIDITY
9
80
﹪
7
60
﹪
5
40
﹪
3
30
﹪
1
20
﹪
