-
31 -
The Timeout value- it will become disconnected after the timeout value you set.
The value is integer, and must be between 0~65535. If the value is set to 0, then it
will never be disconnected. The default value is 60seconds. After you have done
all the settings, click
Apply
to save them, and the result will be shown in the DLS
status field (the MAC address and timeout value will be shown in the Status
field).
About
This page displays the wireless card and driver version information
Summary of Contents for WCU5102
Page 12: ... 7 ...
Page 17: ... 12 ...