52
3.
Select the
TCP/IP
protocol for your network card.
4.
Click on the
Properties
button. You should then see a screen like the following.
5.
Ensure your TCP/IP settings are correct, as described below.
Using DHCP
•
To use DHCP, select the radio button
Obtain an IP Address automatically
. This is the default
Windows setting. Using this is recommended. By default, the Wireless Portable Router will act as
a DHCP Server.
•
Restart your PC to ensure it obtains an IP Address from the Wireless Portable Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following
changes.
•
Enter the Wireless Portable Router 's IP address in the
Default gateway
field and click
OK
. (Your
LAN administrator can advise you of the IP Address they assigned to the Wireless Portable Router.)
