Chapter 3: Configuration
12
Network
LAN Interface Setup
IP Address
Shows the IP address of the Wireless Router (Default IP address is
192.168.1.254)
Subnet
Mask
The subnet mask of the Wireless Router (Default subnet mask is 255.255.255.0.)
Default
Gateway
Shows the default gateway of this Wireless Router.
DHCP Mode
Disable
: Select to disable this Wireless Router to distribute IP addresses to
connected clients.
Server
: Select to enable this Wireless Router to distribute IP addresses (DHCP
Server) to connected clients. And the following field will be activated for you to
enter the starting IP address.
Client
: Select the client mode to use the
DHCP
Client Range
The starting address of this local IP network address pool. The pool is a piece of
continuous IP address segment, the device will distribute IP addresses from
192.168.1.100 to 192.168.1.200 to all the computers in the network that request
IP addresses from DHCP server (Router). The end IP address maximum is 253.
Note:
If “Continuous IP address pool starts” is set at 192.168.1.1 and the
“Number of IP address in pool end” is 253, the device will distribute IP addresses
from 192.168.1.100 to 192.168.1.253 to all the computers in the network that
request IP addresses from DHCP server (Router).
Click
Show Client
button to show
Active DHCP Client Table
. The table shows
