Chapter 3: Configuration
23
Multiple APs
This page shows and updates the wireless setting for multiple APs.
User can set up the multiple AP here.
Network Type
If the mode be set to AP or Client mode that the network type can be set to
Infrastructure or Ad hoc.
SSID
A SSID(Service Set Identifier) is referred to a network name because
essentially it is a name that identifies a wireless network (case-sensitive).
Channel Width
Select 20MHz/40MHz channel width, the channel number will be form 5~11
and auto; Select 20MHz channel width the channel number will be form
1~11 and auto. Default is 20MHz/40MHz.
Channel
Selection
The channel number base on the channel width you select.
Broadcast SSID
Enabled
:
This wireless AP will broadcast its SSID to stations.
Disabled
:
This wireless AP will not broadcast its SSID to stations. If stations
want to connect to this wireless AP, this AP’s SSID should be known in
advance to make a connection.
WMM
The WiFi Multiple Media function is available under 2.4GHz (B), 2.4GHz
(G) and 2.4GHz (B+G) band, and it is
disabled
under 2.4GHz (N), 2.4GHz
(G+N) and 2.4GHz (B+G+N) band.
Data Rate
There are several data rate that you can select from the pull-down menu.
Associated
Clients
Click
Show Active Clients
button to show all the listed active clients.
Enable Mac
Clone (Single
Ethernet Client)
This function will be enabled under Client mode.
