PROBOIL.2X user & installation guide v1e-2
10
1.2.2
Filter replacement guide:
The product is supplied with a filter specifically designed to both improve the taste and clarity of the water but also to
assist protecting the boiler from contaminants and scale.
Each filter has a maximum life span of 6 months or 1000 litres (apx. 2800 cups), whichever occurs first. Regardless of the
amount of usage it is required for you to replace the filter on schedule for reasons of product protections, hygiene and
maintaining your warranty.
Only genuine parts must be used to maintain your product warranty, these are available at proboil.co.uk or by calling
(+44) 01226 283434.
Before beginning you should have ready to hand:
•
Your replacement filter
•
A large bowl or pan or jug or small bucket.
•
A cloth
•
A permanent pen
1.
Remove the new filter from its packaging and
remove any end dust caps (plugs) from both ends
of the filter.
2.
Write todays date on the “installed on” section on
the filters label in permanent pen.
3.
Only If your tap includes a cold filtered water
dispense option:
a.
Ensure to turn off the valve directly before the
filter inlet so the valve is in the indicated
“closed” position.
b.
Turn the tap handle to dispense filtered cold
water, let is run until the water slows then
stops completely then turn the filtered water
handle to the off position.
4.
If your tap does not include a cold filtered water dispense option:
Turn the 98° handle to the off (upright)
position.
5.
Pull the existing filter cartridge from its wall
mounting clip, with the blue tubes still connected.
6.
Place a bowl (or similar) under the filter cartridge
and pipes to catch any retained water in the
system.
