PROBOIL.2X user & installation guide v1e-2
6
1.1.5
Day to day usage considerations:
Using the product safely
⚠
Hot water: We have taken great care to deliver a product with many built in safety features, but
you will also need to take due care when dispensing heated water to avoid accidental scalding. It is
important that everyone who uses this product understands how to use it safely. The example shown
in this guide may vary slightly from model to model.
⚠
Continual short dispenses of water <100ml may fill the internal expansion vessel in the boiler,
this may cause the product to drip water from the tap spout when the boiler is heating, if you
experience this then dispense a few litres of water to self-empty the expansion vessel.
To dispense hot water (Model may vary):
1)
Fully push the 98° water lever down to bypass the child lock and
simultaneously turn the handle forwards, the further the lever is
turned the greater the flow.
2)
At around 45° rotation is reached (Fig 2.) and the maximum flow
is achieved. It is normal for the hot water to take a moment to
dispense as the water may empty from the product after use.
3)
After use ensure to close the 98° water handle, when fully closed
the child lock will self-engage. Certain models may also include a
self-closing handle. It is normal for the hot water to take a
moment to stop fully as the pressure in the system drops and
remaining water in the tap drains.
NOTE: PLEASE REFER TO THE TAP
INSTALLATION GUIDE FOR YOUR
CHOSEN TAP AS MODELS VARY
Reducing the risk of splashing:
1)
Avoid holding the vessel that you are filling too far away or close
from the spout exit. We recommend around 5-10cm (2-4”).
2)
Tilt the cup slightly to reduce the splashing from the base of the
cup.
3)
Turn the 98° water handle on slowly and progressively once the
cup is part full then open the handle more.
To get the best results:
Each time the product is used you should flush a small amount of boiled water through before use. This ensures
fresh water is dispensed, typically this can be used to preheat your cup. If unused for extended periods, then flush the
product for a longer time.
