PROBOIL 2 to PROBOIL.2X Upgrade Installation Guide v1b
4
1.1.4
Sensible fire safety precautions:
⚠
Do not store or use petrol or other flammable rags, paper, aerosols, vapours or liquids in the
vicinity of this or any other appliance.
⚠
Install the unit on a heat-resistant surface. Make sure that the installation surface is firm and
level.
⚠
For safety regulations the plug or means of disconnection must always be accessible after
installation.
⚠
Do not use any water jet or steam near this appliance.
⚠
Always ensure an airgap of at least 10mm around the appliance and that any closed cabinet has
sufficient airflow.
2.1
2.1
2.1
2.1
Installation:
Installation:
Installation:
Installation:
2.1.1
Installation preparation
Throughout this guide, the following symbols are used to highlight key points or safety considerations.
An information point or tip for
installation or usage.
A service, maintenance
or care consideration.
⚠
A technical or safety
consideration or warning of
hazardous situation with regard to
life and property.
Preparing yourself to install your replacement PROBOIL2X boiler is simple and ensures the process is
both quick and safe. The process is very similar to the descaling and cleaning maintenance process in your
user guide and requires no specialist tools or knowledge other than this guide.
⚠
Before installing your replacement boiler please unpack it and check for any missing parts or transport
damage, in case of an issue please contact the service number on top of the boiler.
Whilst installing your replacement boiler please check if the filter is also due to be replaced.
You might find it helpful to photograph the installation before your remove the old boiler as a
memory aid.
