EN
12
Maintenance
Daily Maintenance
• Regular comprehensive cleaning will extend the life of your WalkSlim 830
• Always turn the power off at the power outlet and make sure there is no moisture
before daily cleaning and maintenance.
• Clean dust out regularly and ensure the exposed parts of the tread belt are clean.
• Wear clean sports shoes to avoid any dust or impurities getting into the tread belt
and board.
• Use a damp cloth with soap or detergent to clean the tread belt. Do not use
excessive water and avoid leakage to the electrical components and underneath the
running belt
• Disconnect the power cord when the WalkSlim 830 will not be used for a long time.
• Do not store the treadmill in the bathroom or outside and avoid areas with a lot
of moisture.
WARNING
Unplug the treadmill before performing maintenance.
Troubleshooting
The treadmill is
not working
•
Make sure the power cord is properly secured into the power
outlet and that the switch is turned to the ‘ON’ position.
•
Check the Safety Key is in the correct position.
•
Ensure you have not been using the Walkslim 830 for more
than 120 minutes continuously. In order to better maintain
your WalkSlim 830 and extend the life of the treadmill,
we recommend that you turn off the power and allow the
machine to rest for 10 minutes after 2 hours of continuous
use.
The tread belt is
not working
• Insufficient lubrication. Add silicone oil lubricant.
• Tread belt is too tight which will reduce performance and
increase wear of rollers and tread belt. Adjust tread belt
tightness to the correct tension. The tread belt should be able
to be lifted from the base by about 5-7.5cm by hand.
