3. Building and running project (Shield Board)
A31G213CLN Shield Board Quick Start Guide
8
3
Building and running project (Shield Board)
Running application code makes it easier to start the Shield Board. Following the steps below:
Step 1.
Prepare the Starter Kit and Shield Board
Step 2.
Set up the Starter Kit and Shield Board
Step 3.
Connect the Starter Kit to your PC
Step 4.
Run the application Project
Step 5.
Compiling application Code
Step 6.
Download application Code
Step 7.
Debugging application Code
Step 8.
Check the application Code Operation
