LS Parking Garage Light
Instruction Manual
Trunnion Mount
INSTALLATION
Ref#: 20220801
1. Untie four 8-32 UNC screws from the body, and open the connection box.
2. Install the Trunnion on the Connection Box with Scew A, Lock Washers, Washer A, Big Washers and Nuts(4).
4. Connect with the AC wire of power in the connection box.
6. Adjust the angle of the fixture by Angle Looking Scews and Center Bolts on the trunnion.
3. Secure Connection box to a desired Mounting Surface by the Trunnion bracket with customer supplied fasterner.
Feed the supply lead into the Connection box through a 1/2 NPS hole.
5. Attach four 8-32 UNC screws to the connection box back and tighten the screws. Make sure the seal ring is in the
right place before tightening the screws.
2
1/2 NPS
Plug (3)
Connection
box
Body
8-32 UNC
Scew (4)
8-32 UNC
Screw
3.00"
0.
53
"
0.5"
Screw A
Lock washer
Washer A
Angle Looking Screw
Center Bolt
Big Washer
Nut
Hole
Connection box
Trunnion
Add:
1135 Thomas Busch Highway, Pennsauken, NJ 08110
Phone:
866-222-8866
E-mail:
info@abovealllighting.com
Web:
www.AboveAllLighting.com ©2016 ABOVE ALL, Inc. All rights reserved
