Add:
1501 Industrial Way N, Toms River, NJ 08755
Phone:
866-222-8866
E-mail:
info@abovealllighting.com
Web:
www.AboveAllLighting.com ©2016 ABOVE ALL Lighting, Inc. All rights reserved
4
MT LED AREA LIGHT / FLOOD LIGHT
Instructions Manual
1. Fasten the 1/2 NPS Waterproof Bushing to the luminaire.
2. Thread the luminaire cord through the center opening of Trunnion Bracket along with a Waterproof Bushing and
Gasket. Fasten the Trunnion to the luminare using Screw A, Spring and Flat Washer (6).
3. Dill the desired bracketry according to the drill pattern. Install the trunnion to a desired bracketry by the hole using
Bolts, Locking Washers and Nuts (2) (not supplied).
4.
Adjust the angle of the fixture by trunnion.
a. Loosen Screws B (2) and remove Screw C (2) on the TR Arm B.
b. Swivel fixture to a desired angle.
c. Tighten Screws B and C (2) to secure TR Arm A and B.
5. Make wire connections between luminaire and supply wires in bracketry with appropriate waterproof connectors.
TRUNNION MOUNT (TR)
Trunnion Mount Drill Pattern
Ref#:10426-10904
Screw A, Spring and Flat Washer (6)
1/2 NPS Waterproof Bushing
Gasket
TR Arm A
Luminaire
Screw C (2)
Screw B (2)
TR Arm B