background image

 

 

64

5.

 

To apply your changes:  

 

Use the "Deactivate" and "Activate" buttons, if available. 

 

OR, restart your system. 

Other Unix Systems 

To access the Internet via the Wireless Portable Router: 

 

Ensure the "Gateway" field for your network card is set to the IP Address of the Wireless Portable 
Router. 

 

Ensure your DNS (Name Server) settings are correct. 

Wireless Station Configuration 

 

This section applies to all wireless stations wishing to use the Wireless Portable Router 's access 
point, regardless of the operating system that is used on the client. 

 

To use the Wireless Portable Router, each wireless station must have compatible settings, as 
following: 

Mode 

 

The mode must be set to 

Infrastructure

SSID (ESSID) 

The network name must match the value used on the Wireless Portable 
Router. 

Note! The SSID is case- sensitive.

 

Open

 

Shared Key 
 

If there is no security is enabled on the Wireless Portable Router, the 
security of each station should be disabled as well. And, you can 
connect the Wireless Portable Router without security, but it is NOT 
recommended. 

WEP auto 

By default, WEP on the Wireless Portable Router is disabled. 

 

If WEP remains disabled on the Wireless Portable Router, all 
stations must have WEP disabled. 

 

If WEP is enabled on the Wireless Portable Router, each station 
must use the same settings as the Wireless Portable Router. 

WPA-PSK 
WPA2-PSK 
WPA-PSK WPA2-PSK 

WPA-PSK (TKIP/AES)/ WPA2-PSK (TKIP/AES)/ WPA-RADIUS 
(TKIP/AES)/ WPA2 -RADIUS (TKIP/AES): If one of these securities is 
enabled on the Wireless Portable Router. To make a connection, each 
station must use the same algorithms and pass phrase as the Wireless 
Portable Router. 

WPA 
WPA2 
WPA WPA2 
802.1x 

RADIUS Server: RADIUS is an authentication, authorization and 
accounting client-server protocol. The client is a Network Access Server 
that desires to authenticate its links. The server is a server that has 
access to a user database with authentication information. Each station 
must set up the RADIUS Server’s IP address, port and passwords that 
provided by your ISP. 

Note:  By default, the Wireless Portable Router will allow 802.11b, 802.11g and 
802.11n connections. 

Summary of Contents for ABOWAY WR5204E










































































Reviews: