WING System® option installation instructions for automatic slatted safety covers - 10/12
10
2.9 Positioning of the compensation blocks
Mandatory installation when the WING System® is not at the
end of the slat cover.
Fig. 17
Fig. 17
Côté Enrouleur
6
Tablier
Wing
The compensation blocks must be clipped
to the points marked by red stickers.
Unrolling direction
Rolling up direction
The first block on the rolling
side must always be on the
outside.
Slat cover
Roller side
Cross-section view of a compensation block positioned on
a slat
Fig. 18
Fig. 18
