9
EN
7. Procedure for using the start-up aid:
Important:
1. Always make sure that the capacity of the battery of the Mini
Jumpstarter is above 75%.
2. Recharge the internal battery of the Mini Jumpstarter EVERY 3
MONTHS, even if you have not used the Mini Jumpstarter.
3. Always make sure that clamps and the connector are properly
connected before attempting to start up of the vehicle.
4. If the engine does not start up at the first attempt, wait for 1 minute
before trying to start it up again.
5. After use in start-up aid mode, fully recharge the internal battery of
the Jumpstarter as soon as possible.
6. The Mini Jumpstarter is a start-up aid and cannot fully substitute
the power of an original battery. If the battery of your vehicle is
completely discharged or faulty, the Mini Jumpstarter will not have
enough power to start up your vehicle.
1- Connect the
clamps to the
correct
terminals of the
battery in the
following way:
Red Clamp (+)
to the red
terminal (+) of
the battery
2- Connect the
clamps to the
connector (2) of
the Mini
Jumpstarter
3- Start the
vehicle (no
more than 3
seconds) and
wait for 1 minute
between each
start-up attempt.
4- Disconnect
the clamps of
the connector
(2) of the Mini
Jumpstarter
within 30
seconds of
starting the
vehicle.
5- Disconnect
the clamps from
the terminals of
the vehicle's
battery.
START
